Skip to main content
Pride Wallpaper Paste
Pride Wallpaper Paste
High performance Wallcovering Adhesive from Belgraiva Decor.
- Super Strong Adhesion
- All Purpose Paste
- Instant Mix
How to Prepare
For best results, good preparation of the walls is essential. Surfaces should be dry, clean and free from any damp. Wall defects must be rectified before decorating and any damp cured at source.
To Mix
See table below for quantity of cold water to use. Remove corner of sachet and sprinkle contents into water, stirring briskly for 30 seconds to ensure dispersion. Stir occasionally and use after approximately 3 minutes.
|
Mixing Table |
6 Pint Sachet |
|
12 Pint Sachet | ||
|
Application per Sachet |
Qty of Cold Water | Approx Coverage | Qty of Cold Water |
|
|
| Normal Wallpapers including woodchip | 6 Pints | 5 Rolls | 12 Pints | 10 Rolls | |
| Vinyl and Washable Wallpaper | 5 Pints | 4 Rolls | 10 Pints | 8 Rolls | |
| Blown Vinyl Wallpaper | 5 Pints |
4 Rolls |
10 Pints |
8 Rolls |
|
| Heavy Embossed Wallpaper | 3.5 Pints | 2.5 Rolls | 7 Pints | 5 Rolls | |
| For use as Sizing | 8 Pints | 500sqft | 16 Pints | 1000sqft |
To Paste
Follow Manufactures instructions and spread paste generously towards the edges. Take care to keep the surface of the wallcovering Free Of Paste. Accidental splashes should be wiped away with a clean, damp cloth.
To Size
New Walls and absorbent surfaces need to be sized before papering. Mix full sachet contents into 8 pints of water. Stir and apply to walls.
